Configuration
3.1 System
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
70 Configuration Manual, 11/2015, C79000-G8976-C252-10
Call up the command with the following parameters:
clear line vty {<line-number(2-9)>|all}[forceful-clear]
The parameters have the following meaning:
Number of the connection that will be
2 ... 9
terminates all connections
closes a session that is not reacting
The console session is closed.
You show the logged-on users with the show users command.
configure terminal
Description
With this command, you change to the Global configuration mode.
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Call the command without parameters:
configure terminal
You are now in the Global configuration mode.
The command prompt is as follows:
cli(config)#
To Next Page
Loading...
Need help?
General